As the youngest company in the Maskim family, İnoveta Kompozit San. Tic. Ltd. Şti. began its operations in 2018.
Inoveta Kompozit Tic. Ltd. Şti. is a young company founded by its founding partners who combined their 40 years of personal and corporate experience in the Turkish composites industry. The company aims to contribute to the sector with many innovative products in addition to the conventional products of distinguished national and international companies.
Inoveta aims to be a close solution partner for its customers, particularly in applications such as engineering plastics, hot molding, pultrusion, RTM, and fields such as renewable energy. Its product range includes chopped glass fiber products, Continuous Filament Mat (CFM), RTM mat, special fabrics, multiaxial fabrics, unsaturated polyester resins, epoxy resins, internal mold release systems suitable for hot and cold molding applications for all resin systems, and various additives.
...
E-Glass RTM Mat used for closed mold (RTM) applications, due to its resin flow capability. Available with diffe...
High-performance multiaxial reinforcements are engineered fabrics consisting of one or more layers of unidirect...
Aluminium panel rollers provide to release air bubbles on the hand laminating large product surface....
Plastic panel rollers provide to release air bubbles on the hand laminating large product surface...
Vinyl ester-based resins engineered to provide exceptional resistance to acids and bases, outstanding durabilit...
Designed for applications requiring high chemical resistance, exceptional aesthetics, and maximum durability ag...
Non-woven materials used to increase the thickness and rigidity of the GRP products while decreasing the weight...
...
Some of the tools needed in GRP production workshops are listed in the following table ...
Polyester resin for production of bath tubs and sanitary wares with using casting acrylic sheets and extr...
Flow mesh design for distibuting the resin homogeneneously and efficiently on mould surface, during to in...
The chopping gun is used for cutting E-Glass and Alkali-Resistant (AR) rovings into desired lengths....
Multi end rovings for various applications. The products and some basic properties of the most preferred e-glas...
...
...
Casting type polyester resins can use with filler or fully transparent; in the production of synthetic ma...
Polyester resins which are specifically designed for use in polyester mold production. They are formulated...
Wolfangel Impregnators used to improve production rate of big GRP parts which is produce with hand laminating m...
Polyester resin for production of flame retardant type,halogen or halogen free GRP products with lamination or...
Accelerators are compounds used in the polyester and vinyl ester resins to speed up the curing reaction. Produc...
...
...
Various equipment designed to complete and optimize the vacuum system for infusion applications...
...
Airbond, which we represent, manufactures high‑performance splicers designed for use with all types of fibers a...
...
General purpose type polyester resins with various version;thixotropic , accelerated ,blue indicator, low styre...
Chopped strand mats (CSM) and stitched mats with various unit weight,lenght and binder; for reinforcement of GR...
Solvent resistant wooden handled brushes for GRP applications...
Polyester resins suitable for the production of eternit/corrugated or flat sheets with the continuous laminatio...
Vacuum films are co-extrude multi-layer films used for infusion and vacuum bagging applicaions.Available in var...
...
Woven Roving (WR) with various unit weight,lenght and weave; for reinforcement of GRP products. The product...
Solvent resistant wool impregnating rools for hand lay up applications on GRP industry....
Closed mould injection (RTM) method allow to get both sides smooth and glossy surface proucts. Wolfangel RTM (i...
XPS (styrofoam) friendly polyester resin which not affect to styrofoam and suitable for GRP application with st...
Flexible roll used to relase air bubbles on surface of the concave and convex moulds...
Gelcoats designed for the production of automotive parts that will be painted later. Containing fillers and pig...
Wolfangel Dispenser’s allow to dosing polyester resin and peroxide in exact proportioning . Optional mixi...
Plastic rollers provide to release air bubbles on the hand laminating GRP product's surface...
Wool discs for polishing GRP products' surface....
...
High-performance brush /spray-type gelcoats, designed to deliver superior chemical, mechanical, and atmospheric...
Gelcoats listed in this group,formulated for mould production.High impact,heat and chemical resistance(aging ef...
Aluminum rollers used in hand lay-up CTP part production to eliminate air bubbles in the laminating layer appli...
General-purpose gelcoats are designed for economical applications where resistance to weathering, water, or che...
Spray up is the most efficient open moulded GRP production method.As well as minimum %30 time savings tha...
Gelcoats listed in this group,formulated for mould production.High impact,heat and chemical resistance(aging ef...
These products designed by Maskim’s experienced technical staff to meet the needs of the sector. Pneumati...
Sandwich Core materials used to obtain lighter products improved mechanical properties of GRP parts....
Low styrene emission polyester resin for produce GRP products with high mechanical properties with using...
...
In the manufacturing of GRP (Glass Reinforced Plastic) products, thinning solvents play a crucial role in reduc...
...
...
Tooling resins are designed to be used in GRP mold production. It is designed to provide a high level of resist...
Catalysts are providing to final reach of the GRP products to using together with accelerators such as cobalt o...
...
Gelcoat and paint spray gun with different nozzle sizes(1 to 4 mm)...
The product code and some basic properties of the most preferred release agents are specified in the...
Peel ply fabrics used to texture the surface of composite laminate and these surface help for secondary bonding...
Color pastes produced with high quality pigment powder which dispersed in styrene-free polyester resin. T...
Polyester resins designed for applications such as repairing GRP parts, producing adhesive putties, or enhancin...
Thanks to the high pressure external mixing gun you achieve outstanding micro porosity free surfaces. There wil...
...
Plastic wedge used in the production of FRP part to removefinal product from the mold without damaging the mold...
...
...
Adhesives for bonding strongly composites to metals,plastics,or composites. According to usage ,there are polye...
Economic release film used to seperate peel ply and breather on infusion process. The product code and some...
Single-End Rovings for filament winding, pultrusion and weaving processes. The product code and some basic p...
RTM mould sealers to close and seal classical RTM or Light RTM molds. The product code and some basic proper...
...
SMC products are obtained by blending suitable reinforcement materials, resins, fillers, catalysts, mold releas...
Breather fabric is a lightweight, absorbent, non-woven polyester fabric that provides a path for air to be remo...
Fillers with different properties to increase performance of resin and reduce to cost of the final products....
Polyester resins are used to obtain resistance for chemicals and high tempratures to production of chemic...
...
Flame retardant gelcoats are ideal where chemical, mechanical resistance is not necessary but flame r...
...
Pultrusion type polyester resins with high reactivity, high mechanical strength and high HDT (Heat Deflection T...
Polyester resins suitable for production with SMC and BMC methods, compatible with thermoplastic additives and...
...
Chopped strands are used in composite production to enhance mechanical strength and provide reinforcement compa...
Polyester resins suitable for pipe production using the filament winding method. The product codes and some...
Metal disc rollers used to relase air bubbles on surface which is applied with high viscocity resin....
Sealer tapes for different process tempratures and surfaces in infusion applications. The product code and s...
Materials to make a ready surface of the model; which is made of wood,gypsum,polyurethane,polystyrene foam; to...