XPS (styrofoam) friendly polyester resin which not affect to styrofoam and suitable for GRP application with st...

Plastic wedge used in the production of FRP part to removefinal product from the mold without damaging the mold...

Low styrene emission polyester resin for produce  GRP products with high mechanical properties with using...

Economic release film used to seperate peel ply and breather on infusion process. The product code and some...

Polyester resin for production of bath tubs and sanitary wares with using  casting acrylic sheets and extr...

Adhesives for bonding strongly composites to metals,plastics,or composites. According to usage ,there are polye...

Sandwich Core materials used to obtain lighter products improved mechanical properties of GRP parts....

General purpose type polyester resins with various version;thixotropic , accelerated ,blue indicator, low styre...

...

...

SMC products are obtained by blending suitable reinforcement materials, resins, fillers, catalysts, mold releas...

...

Polyester resins are used to obtain resistance for chemicals and high tempratures  to production of chemic...

Gelcoat and paint spray gun with different nozzle sizes(1 to 4 mm)...

Chopped strand mats (CSM) and stitched mats with various unit weight,lenght and binder; for reinforcement of GR...

Polyester resins designed for applications such as repairing GRP parts, producing adhesive putties, or enhancin...

...

Wool discs for polishing GRP products' surface....

Plastic panel rollers provide to release air bubbles on the hand laminating large product surface...

Polyester resins suitable for the production of eternit/corrugated or flat sheets with the continuous laminatio...

Some of the tools needed in GRP production workshops are listed in the following table ...

Gelcoats designed for the production of automotive parts that will be painted later. Containing fillers and pig...

Flame retardant gelcoats are ideal where chemical, mechanical resistance is not necessary but flame r...

Materials to make a ready surface of the model; which is made of wood,gypsum,polyurethane,polystyrene foam; to...

E-Glass RTM Mat used for closed mold (RTM) applications, due to its resin flow capability. Available with diffe...

Designed for applications requiring high chemical resistance, exceptional aesthetics, and maximum durability ag...

Polyester resins suitable for pipe production using the filament winding method. The product codes and some...

Plastic rollers provide to release air bubbles on the hand laminating  GRP product's surface...

Woven Roving (WR) with various unit weight,lenght and weave; for reinforcement of GRP products. The product...

Sealer tapes for different process tempratures and surfaces in infusion applications. The product code and s...

Airbond, which we represent, manufactures high‑performance splicers designed for use with all types of fibers a...

Polyester resin for production of flame retardant type,halogen or halogen free GRP products with lamination or...

...

Pultrusion type polyester resins with high reactivity, high mechanical strength and high HDT (Heat Deflection T...

Wolfangel Impregnators used to improve production rate of big GRP parts which is produce with hand laminating m...

Vacuum films are co-extrude multi-layer films used for infusion and vacuum bagging applicaions.Available in var...

High-performance multiaxial reinforcements are engineered fabrics consisting of one or more layers of unidirect...

...

...

Metal disc rollers used to relase air bubbles on surface which is applied with high viscocity resin....

...

Solvent resistant wooden handled brushes for GRP applications...

...

Polyester resins suitable for production with SMC and BMC methods, compatible with thermoplastic additives and...

...

Solvent resistant  wool impregnating rools for hand lay up applications on GRP industry....

Accelerators are compounds used in the polyester and vinyl ester resins to speed up the curing reaction. Produc...

...

Catalysts are providing to final reach of the GRP products to using together with accelerators such as cobalt o...

Flow mesh design for  distibuting the resin homogeneneously and efficiently on mould surface, during to in...

Fillers with different properties to increase performance of resin and reduce to cost of the final products....

Aluminium panel rollers provide to release air bubbles on the hand laminating large product surface....

The product code and some basic properties of the most preferred  release agents are specified in the...

...

...

...

Single-End Rovings for filament winding, pultrusion and weaving processes. The product code and some basic p...

High-performance brush /spray-type gelcoats, designed to deliver superior chemical, mechanical, and atmospheric...

...

Spray up is the most efficient open moulded GRP production method.As well as minimum  %30 time savings tha...

Gelcoats listed in this group,formulated for mould production.High impact,heat and chemical resistance(aging ef...

Breather fabric is a lightweight, absorbent, non-woven polyester fabric that provides a path for air to be remo...

Thanks to the high pressure external mixing gun you achieve outstanding micro porosity free surfaces. There wil...

Tooling resins are designed to be used in GRP mold production. It is designed to provide a high level of resist...

General-purpose gelcoats are designed for economical applications where resistance to weathering, water, or che...

Multi end rovings for various applications. The products and some basic properties of the most preferred e-glas...

In the manufacturing of GRP (Glass Reinforced Plastic) products, thinning solvents play a crucial role in reduc...

Gelcoats listed in this group,formulated for mould production.High impact,heat and chemical resistance(aging ef...

RTM mould sealers to close and seal classical RTM or Light RTM molds. The product code and some basic proper...

These products designed by Maskim’s experienced technical staff to meet the needs of the sector. Pneumati...

Flexible roll used to relase air bubbles on surface of the concave and convex moulds...

Wolfangel Dispenser’s allow to dosing polyester resin and peroxide in exact proportioning . Optional mixi...

Polyester resins which are specifically designed for use in polyester mold production. They are formulated...

Chopped strands are used in composite production to enhance mechanical strength and provide reinforcement compa...

Non-woven materials used to increase the thickness and rigidity of the GRP products while decreasing the weight...

Vinyl ester-based resins engineered to provide exceptional resistance to acids and bases, outstanding durabilit...

Various equipment designed to complete and optimize the vacuum system for infusion applications...

Casting type polyester resins can use  with filler or fully transparent; in the production of synthetic ma...

Peel ply fabrics used to texture the surface of composite laminate and these surface help for secondary bonding...

...

...

Color pastes produced with high quality pigment powder  which dispersed in styrene-free polyester resin. T...

...

Aluminum rollers used in hand lay-up CTP part production to eliminate air bubbles in the laminating layer appli...

The chopping gun is used for cutting E-Glass and Alkali-Resistant (AR) rovings into desired lengths....

Closed mould injection (RTM) method allow to get both sides smooth and glossy surface proucts. Wolfangel RTM (i...

...

...

...